Place to Ride Near Leek, Staffs.

Off on a rideout ? or know of a good place to ride ? then let us all know here.
User avatar
Scoobie
New kid on the block
New kid on the block
Reactions:
Posts: 15
Joined: 18 May 2005, 20:07
Place to Ride Near Leek, Staffs.

Post by Scoobie » 21 Jan 2007, 18:58

Hi,

Place to ride - if your interested - that I've just found:

From Leek get on the Buxton Road (A53). Follow road past houses & school, as you come to a left bend in the road there's a white pub on the right, turn down there, go to bottom and there's a turn on right (1st right) with sign 'alternate route' - follow that. As you get to the top there's a T-juntion. turn left - look up at the top of the hill - there's a farm house on the right with a flag pole. Go there to pay and they'll tell you where to go.

I'd attach two pics, but I don't see that option on the 'post new topic' screen???
Scoobie

User avatar
madmanreevo
Site Supporter
Site Supporter
Reactions:
Posts: 122
Joined: 03 Oct 2004, 19:46
Bike Owned: crm 2.2
Location: warrington Cheshire UK

Post by madmanreevo » 21 Jan 2007, 19:06

how much :?:
3rd CRM250 MK2, rebuilt incl Braided hoses,powdercoated,one off bronze swingarm bushes,taper head bearings,hard chromed fork, poweredcoated rear spring and rebuilt. custom graphics, also own TL1000s, Aprillia RS250 (300 kit stage 3 tuned), Yamaha RD400c

User avatar
Scoobie
New kid on the block
New kid on the block
Reactions:
Posts: 15
Joined: 18 May 2005, 20:07

Post by Scoobie » 21 Jan 2007, 19:16

£5 all day.
Scoobie

User avatar
mickstoy
Regular Visitor
Regular Visitor
Reactions:
Posts: 178
Joined: 27 Oct 2006, 13:07
Location: biddulph stoke on trent

Post by mickstoy » 21 Jan 2007, 19:18

i used to ride there its an old mx track last time i went (about three years ago) it was a fiver all day but a lot of 4x4s were goin at the time maybe different now though! im only a few miles from there so if anyone is goin up give me a shout
last time i went was on a kx 420 with shagged suspension i ended up breaking my wrist after being there about 20 min which was nice :lol:
91 mk2

User avatar
madmanreevo
Site Supporter
Site Supporter
Reactions:
Posts: 122
Joined: 03 Oct 2004, 19:46
Bike Owned: crm 2.2
Location: warrington Cheshire UK

Post by madmanreevo » 21 Jan 2007, 19:21

KX420 mad bike.......gissago :evil:
3rd CRM250 MK2, rebuilt incl Braided hoses,powdercoated,one off bronze swingarm bushes,taper head bearings,hard chromed fork, poweredcoated rear spring and rebuilt. custom graphics, also own TL1000s, Aprillia RS250 (300 kit stage 3 tuned), Yamaha RD400c

User avatar
mickstoy
Regular Visitor
Regular Visitor
Reactions:
Posts: 178
Joined: 27 Oct 2006, 13:07
Location: biddulph stoke on trent

Post by mickstoy » 21 Jan 2007, 19:28

:lol: sold it years ago mate kept tryin to kill me (road legal aswell) well sort of :wink: sold it to a lad off the estate never saw the bike again but i saw him with a broken arm though a few weeks later
91 mk2

User avatar
madmanreevo
Site Supporter
Site Supporter
Reactions:
Posts: 122
Joined: 03 Oct 2004, 19:46
Bike Owned: crm 2.2
Location: warrington Cheshire UK

Post by madmanreevo » 21 Jan 2007, 19:35

I had a kx250 aircooled with a couple of mates when I was 15 .....that was mad mad mad :!: KX420 i can only imagine :!: I love them old bikes rebuilt an Yam IT250 to pristine condition a few years ago..awesome
sold as neighbour moaned of noise which upset her in doors...
got pics if interested in seeing it....
3rd CRM250 MK2, rebuilt incl Braided hoses,powdercoated,one off bronze swingarm bushes,taper head bearings,hard chromed fork, poweredcoated rear spring and rebuilt. custom graphics, also own TL1000s, Aprillia RS250 (300 kit stage 3 tuned), Yamaha RD400c

User avatar
mickstoy
Regular Visitor
Regular Visitor
Reactions:
Posts: 178
Joined: 27 Oct 2006, 13:07
Location: biddulph stoke on trent

Post by mickstoy » 21 Jan 2007, 19:49

nice 1 send them through avnt seen one of those for years i bet you wish you had kept it there worth good money now arnt they?
91 mk2

User avatar
madmanreevo
Site Supporter
Site Supporter
Reactions:
Posts: 122
Joined: 03 Oct 2004, 19:46
Bike Owned: crm 2.2
Location: warrington Cheshire UK

Post by madmanreevo » 21 Jan 2007, 20:13

3rd CRM250 MK2, rebuilt incl Braided hoses,powdercoated,one off bronze swingarm bushes,taper head bearings,hard chromed fork, poweredcoated rear spring and rebuilt. custom graphics, also own TL1000s, Aprillia RS250 (300 kit stage 3 tuned), Yamaha RD400c

User avatar
Gwyn
Site Supporter
Site Supporter
Reactions:
Posts: 783
Joined: 30 Oct 2006, 18:27
Location: All over , WALES.

Post by Gwyn » 21 Jan 2007, 20:18

Nice pics reevo. You done a cracking job on the renovation 8) .
Mud, Sweat and Fear


91-MK2

User avatar
madmanreevo
Site Supporter
Site Supporter
Reactions:
Posts: 122
Joined: 03 Oct 2004, 19:46
Bike Owned: crm 2.2
Location: warrington Cheshire UK

Post by madmanreevo » 21 Jan 2007, 20:18

3rd CRM250 MK2, rebuilt incl Braided hoses,powdercoated,one off bronze swingarm bushes,taper head bearings,hard chromed fork, poweredcoated rear spring and rebuilt. custom graphics, also own TL1000s, Aprillia RS250 (300 kit stage 3 tuned), Yamaha RD400c

User avatar
mickstoy
Regular Visitor
Regular Visitor
Reactions:
Posts: 178
Joined: 27 Oct 2006, 13:07
Location: biddulph stoke on trent

Post by mickstoy » 21 Jan 2007, 22:11

nice very nice!
done a good job there mate
91 mk2

User avatar
purple rooster
Regular Visitor
Regular Visitor
Reactions:
Posts: 128
Joined: 05 Jan 2007, 19:06
Bike Owned: Mk3 prospec
Location: cheadle staffs

Post by purple rooster » 22 Jan 2007, 21:38

verrry nice! :bow: don,t you miss the ear splitting row those old air cooled girls made? TING TING . A couple of mates ,n,me went thirds on an old yz 250 with extra shagged mains when we were about 14 15 , strapped a big torch to the front mudgard and went thrashing round the local woods at night . we bounced a lot better at that age
ayup duck! livin on the edge................of a big rut!

User avatar
madmanreevo
Site Supporter
Site Supporter
Reactions:
Posts: 122
Joined: 03 Oct 2004, 19:46
Bike Owned: crm 2.2
Location: warrington Cheshire UK

Post by madmanreevo » 23 Jan 2007, 19:43

oh yes I LLLLOOve the RING TING TING of the aircooled bikes..
I also had an RD400 that sounded really nice tuned with allspeeds....
I never liked the look of it but once on it it was ace......I want to do an rd 400 special. suz rg 250 banana swing arm and USD forks look good on um......1 day If i can sneek it in me garage without her in doors noticing :wink:
3rd CRM250 MK2, rebuilt incl Braided hoses,powdercoated,one off bronze swingarm bushes,taper head bearings,hard chromed fork, poweredcoated rear spring and rebuilt. custom graphics, also own TL1000s, Aprillia RS250 (300 kit stage 3 tuned), Yamaha RD400c

User avatar
slider
Forum Bore !
Forum Bore !
Reactions:
Posts: 620
Joined: 29 May 2006, 02:23
Location: stoke on trent

Post by slider » 26 Jan 2007, 20:42

i take it your local to leek then scoobie?

reevo man that brings back memories used to have the 465 when i was 14/15 .i was sh***ed if i came off or stalled i couldn't kick start the beast,it was look for the nearest big hill and start pushing :!: :!: :lol:


Post Reply