Ride Height

Olie · Post by **Olie** » 19 Apr 2010, 21:06

hi guys, I recently bought myself a 1991 mk2 crm, and I am 6ft 4, I need to make the bike taller if possible? any help would be greatly appreciated. Thanks, Olie

Post by **fallenmikethebike** » 19 Apr 2010, 21:16

Hi Ollie, welcome to our community,the information your looking for can probably be found by entering "dog Bones " into the site search, this is what you will need to alter to significantly alter the ride height, and the suspension.
Mike

Olie · Post by **Olie** » 19 Apr 2010, 21:18

thanks for the speedy reply and the welcome mike :)

Post by **knackeredMk1** » 19 Apr 2010, 21:39

Complimented by harder springs and heavier oil in the forks.

Olie · Post by **Olie** » 23 Apr 2010, 11:48

hi guys, any suggestions on how to get hold of shorter 'dog bones'? as the ones that are on there aren't suitable for a cut/weld job :/
Thanks, Olie

Post by **voodookid37** » 23 Apr 2010, 16:00

5 or 6mm plate, grinder and pillar drill along with a spare few hours or a friendly engineering place and a homer......

Post by **abigsupermoto** » 23 Apr 2010, 20:30

thicker seat foam to give you more room between seat and pegs ???

Ride Height

Ride Height

Re: Ride Height

Re: Ride Height

Re: Ride Height

Re: Ride Height

Re: Ride Height

Re: Ride Height