crm no spark

[djron]

hi there still having a problem with my lads crm 250 no spark
changed the cdi reg/rec also coil and new plug
a guy used his meter at the coil wires and when you kicked it over the reading was from 30 to 40 volts dc i dont know if thats the way to test it but i would of thought if there is power to the coil wires then theres power getting throw the rest of the circuits magneto reg/cdi etc any help thanks ron

[briangoo]

keep an eye on kramers post as he's having bother with no spark but 30-40 volts does sound hi to me

[djron]

[quote="briangoo"]keep an eye on kramers post as he's having bother with no spark but 30-40 volts does sound hi to me[/quote]
ok thanks ordered new coil on fri so will let you no what the out come is thanks

[scrubs]

Might be worth checking the stator if the new coil provides no joy.
This might help if you are unsure how to go about it - Although I am not sure of the stock resistance specs of the stator.

http://www.youtube.com/watch?v=rCqojU5wHos

[scrubs]

oh and before doing any of that or spending any more money.... Check the kill switch!
check it for continuity or completely bypass/short it while testing.

That would sound far more likely than the stator or coils failing.

[djron]

[quote="scrubs"]oh and before doing any of that or spending any more money.... Check the kill switch!
check it for continuity or completely bypass/short it while testing.

That would sound far more likely than the stator or coils failing.[/quote] seems theres power at the kill switch also power to the coil wires thanks ron

[scrubs]

Hmmm....Bad earth?

[djron]

[quote="scrubs"]Hmmm....Bad earth?[/quote] i just to add bought new coil still no spark all that is left is the stator anybody got one for sale thanks ron

[briangoo]

check out kramers post we ended up swapping my pick ups (mk2 his ar) that sit above the flywheel & it worked. good luck