Oil leak!! help!
-
ben1wylie
- New kid on the block
- Reactions:
- Posts: 10
- Joined: 22 Nov 2010, 08:35
- Bike Owned: 1999 crm250ar
Oil leak!! help!
My bike is leaking a lot of oil and it seems to be coming from a rubber grommet that injects the oil to the petrol.... has 2 wirer's coming out of it ... is there an easy fix for this?
Would appreciate all help ...
Would appreciate all help ...
-
ben1wylie
- New kid on the block
- Reactions:
- Posts: 10
- Joined: 22 Nov 2010, 08:35
- Bike Owned: 1999 crm250ar
Re: Oil leak!! help!
Sorry guy's my bike is a 1999 crm250ar
Re: Oil leak!! help!
I'm presuming you mean hose's and not wires? not quite understanding - you have a hose that comes from the oil pump to the carb inlet are you saying that its leaking at the carb? if so then there is one of those small 'spring' metal clips that keep the hose on at the inlet barb. could be that your hose is old and getting brittle and the clip can cut into the hose. check the condition of the hose and if its ok just cut a cm of hose off and reattched to the barb with the clip.ben1wylie wrote:My bike is leaking a lot of oil and it seems to be coming from a rubber grommet that injects the oil to the petrol.... has 2 wirer's coming out of it ... is there an easy fix for this?
Would appreciate all help ...
Regards
SkidMark
AR's rock!!!
TwinAir filter, Braided Brake Hoses, Swingarm/Shock bearings done!, Rear Shock overhauled and customised by G-Force, 14-44 Gearing, Exhaust decoked (fun with Caustic Soda!), DEP silencer.
TwinAir filter, Braided Brake Hoses, Swingarm/Shock bearings done!, Rear Shock overhauled and customised by G-Force, 14-44 Gearing, Exhaust decoked (fun with Caustic Soda!), DEP silencer.
-
ben1wylie
- New kid on the block
- Reactions:
- Posts: 10
- Joined: 22 Nov 2010, 08:35
- Bike Owned: 1999 crm250ar
Re: Oil leak!! help!
No its at the top of oil tank A ... and has 2 wires hanging out of the rubber grommet ... might be level sensor ... i have a photo of it but cant upload!
-
Active Rascal
- Forum Ghost
- Reactions:
- Posts: 530
- Joined: 24 Feb 2010, 22:06
- Bike Owned: CRM 250 AR
- Location: East Midlands
Re: Oil leak!! help!
Sounds like the plug which is your oil position sensor (I think) as you said. Not sure how to fix, other than to take apart, empty an clean, check the condition of the seal/s - you may find you need to contact Leisure Trail if something needs replacing.
Re: Oil leak!! help!
a quick search using 'oil and 'leak' reveals this post...
http://crm250.co.uk/forum/viewtopic.php ... a7cfa602cd
SkidMark
http://crm250.co.uk/forum/viewtopic.php ... a7cfa602cd
SkidMark
AR's rock!!!
TwinAir filter, Braided Brake Hoses, Swingarm/Shock bearings done!, Rear Shock overhauled and customised by G-Force, 14-44 Gearing, Exhaust decoked (fun with Caustic Soda!), DEP silencer.
TwinAir filter, Braided Brake Hoses, Swingarm/Shock bearings done!, Rear Shock overhauled and customised by G-Force, 14-44 Gearing, Exhaust decoked (fun with Caustic Soda!), DEP silencer.