hot exhaust and plastics ?
-
back off road
- Super Moderator
- Posts: 1027
- Joined: 12 Sep 2010, 10:48
- Bike Owned: KTM 200 exc
- Location: Derbyshire/Notts border
hot exhaust and plastics ?
after doing the CR 125 conversion ive found the edge of the side panel is touching the silencer 
ive seen two products to hopefully stop the panel melting
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... 1334wt_905
http://cgi.ebay.co.uk/10M-EXHAUST-MANIF ... 2413wt_994
has anyone used either of these products or can recommend another solution that doesnt involve pipe bending ?
ive seen two products to hopefully stop the panel melting
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... 1334wt_905
http://cgi.ebay.co.uk/10M-EXHAUST-MANIF ... 2413wt_994
has anyone used either of these products or can recommend another solution that doesnt involve pipe bending ?
Im thinking about a bike with more valves than a powervalve
-
back off road
- Super Moderator
- Posts: 1027
- Joined: 12 Sep 2010, 10:48
- Bike Owned: KTM 200 exc
- Location: Derbyshire/Notts border
Re: hot exhaust and plastics ?
better than buying 10m ive found shorter pieces 
http://cgi.ebay.co.uk/UNIVERSAL-THERMAL ... 976wt_1002
http://cgi.ebay.co.uk/UNIVERSAL-THERMAL ... 976wt_1002
Im thinking about a bike with more valves than a powervalve
Re: hot exhaust and plastics ?
small strip of aluminium tape on the panel?
AR's rock!!!
TwinAir filter, Braided Brake Hoses, Swingarm/Shock bearings done!, Rear Shock overhauled and customised by G-Force, 14-44 Gearing, Exhaust decoked (fun with Caustic Soda!), DEP silencer.
TwinAir filter, Braided Brake Hoses, Swingarm/Shock bearings done!, Rear Shock overhauled and customised by G-Force, 14-44 Gearing, Exhaust decoked (fun with Caustic Soda!), DEP silencer.
-
back off road
- Super Moderator
- Posts: 1027
- Joined: 12 Sep 2010, 10:48
- Bike Owned: KTM 200 exc
- Location: Derbyshire/Notts border
Re: hot exhaust and plastics ?
whats the best thing to attatch it with ?
Im thinking about a bike with more valves than a powervalve
Re: hot exhaust and plastics ?
attach what with...?
AR's rock!!!
TwinAir filter, Braided Brake Hoses, Swingarm/Shock bearings done!, Rear Shock overhauled and customised by G-Force, 14-44 Gearing, Exhaust decoked (fun with Caustic Soda!), DEP silencer.
TwinAir filter, Braided Brake Hoses, Swingarm/Shock bearings done!, Rear Shock overhauled and customised by G-Force, 14-44 Gearing, Exhaust decoked (fun with Caustic Soda!), DEP silencer.
-
twistednuts
- Site Supporter
- Posts: 937
- Joined: 07 Feb 2010, 00:37
- Location: Lancashire
Re: hot exhaust and plastics ?
Liquid nails or araldite?
-
abigsupermoto
- Site Supporter
- Posts: 240
- Joined: 23 Apr 2006, 20:53
- Bike Owned: MK3 CRM
- Location: Wirral
Re: hot exhaust and plastics ?
the exhaust end can shouln't get too hot anyway on a two stroke, you can get aluminium foil in strips from a plumbing/gas supplier if you really want to use it and it is self adheasive (like sticky tape just peel of the backing) 
-
back off road
- Super Moderator
- Posts: 1027
- Joined: 12 Sep 2010, 10:48
- Bike Owned: KTM 200 exc
- Location: Derbyshire/Notts border
Re: hot exhaust and plastics ?
sorry skid i didnt read your reply properly missed the tape bit outIm thinking about a bike with more valves than a powervalve
Re: hot exhaust and plastics ?
AR's rock!!!
TwinAir filter, Braided Brake Hoses, Swingarm/Shock bearings done!, Rear Shock overhauled and customised by G-Force, 14-44 Gearing, Exhaust decoked (fun with Caustic Soda!), DEP silencer.
TwinAir filter, Braided Brake Hoses, Swingarm/Shock bearings done!, Rear Shock overhauled and customised by G-Force, 14-44 Gearing, Exhaust decoked (fun with Caustic Soda!), DEP silencer.