My CRM's
- madmanreevo
- Site Supporter
- Reactions:
- Posts: 122
- Joined: 03 Oct 2004, 19:46
- Bike Owned: crm 2.2
- Location: warrington Cheshire UK
My CRM's
My first CRM, which i bought off an importer on near torquay I think. I was a bit disapointed when i first saw it as it had gone rusty in places after being in container. But I soon cleaned it up. Regreted selling it, sold it to try an XR400.
3rd CRM250 MK2, rebuilt incl Braided hoses,powdercoated,one off bronze swingarm bushes,taper head bearings,hard chromed fork, poweredcoated rear spring and rebuilt. custom graphics, also own TL1000s, Aprillia RS250 (300 kit stage 3 tuned), Yamaha RD400c
- madmanreevo
- Site Supporter
- Reactions:
- Posts: 122
- Joined: 03 Oct 2004, 19:46
- Bike Owned: crm 2.2
- Location: warrington Cheshire UK
Re: My CRM's
My 2nd CRM bought off ebay, wasnt too bad I bought a ccm404 while I had it and decided to rebuild it. I stripped it down.
That was as far as I got as i had marriage problems ended up selling both bikes trying to make the marriage work
That was as far as I got as i had marriage problems ended up selling both bikes trying to make the marriage work
3rd CRM250 MK2, rebuilt incl Braided hoses,powdercoated,one off bronze swingarm bushes,taper head bearings,hard chromed fork, poweredcoated rear spring and rebuilt. custom graphics, also own TL1000s, Aprillia RS250 (300 kit stage 3 tuned), Yamaha RD400c
- madmanreevo
- Site Supporter
- Reactions:
- Posts: 122
- Joined: 03 Oct 2004, 19:46
- Bike Owned: crm 2.2
- Location: warrington Cheshire UK
Re: My CRM's
Now then the marriage failed I got divorced and hey presto the bikes are back After going through it I said Id never sell a bike for a women again!! So my third CRM I bought off ebay it was a bin to be honest. I decided to rebuild after finding swingarm pivot totally siezed so i cut off the swingarm with a cutting disc on an angle grinder. As shown in Pic.
3rd CRM250 MK2, rebuilt incl Braided hoses,powdercoated,one off bronze swingarm bushes,taper head bearings,hard chromed fork, poweredcoated rear spring and rebuilt. custom graphics, also own TL1000s, Aprillia RS250 (300 kit stage 3 tuned), Yamaha RD400c
- madmanreevo
- Site Supporter
- Reactions:
- Posts: 122
- Joined: 03 Oct 2004, 19:46
- Bike Owned: crm 2.2
- Location: warrington Cheshire UK
Re: My CRM's
After much cursing, swearing and bloody knuckles months later the crm was done, powdercoated frame + rear shock spring, polished swingarm, polished stainless bolts everywhere, rebuilt rear shock, front suspension top re-anodised, bottom hardchromed with new bushes and seals, taper head bearings, swingarm pivot bushes in engine had bronze bushes made to replace steel ones, Full DEP system, Finished with custom made graphics from dangerUK. Next job is to SM it, which hopefully will be soon as taking it IOM end May for TT.
3rd CRM250 MK2, rebuilt incl Braided hoses,powdercoated,one off bronze swingarm bushes,taper head bearings,hard chromed fork, poweredcoated rear spring and rebuilt. custom graphics, also own TL1000s, Aprillia RS250 (300 kit stage 3 tuned), Yamaha RD400c
-
- Site Supporter
- Reactions:
- Posts: 937
- Joined: 07 Feb 2010, 00:37
- Location: Lancashire
Re: My CRM's
Great bike dude, you made a real good job
Great story too!
Great story too!
- knackeredMk1
- Super Moderator
- Reactions:
- Posts: 4185
- Joined: 03 Nov 2006, 17:41
- Bike Owned: Modified Mk1
Re: My CRM's
Nice bike .
-
- NWAA Supporter
- Reactions:
- Posts: 3520
- Joined: 02 Dec 2007, 16:02
- Bike Owned: MK3
- Location: Mid Surrey
Re: My CRM's
A testimony to what some spit and polish, and a LOT of hard work can produce, well done.
Mike
Mike
VFORCE REEDS-MUGEN HEAD AND BARREL-WHITE POWER-ALL ON MY WISH LIST!!
- Active Rascal
- Forum Ghost
- Reactions:
- Posts: 530
- Joined: 24 Feb 2010, 22:06
- Bike Owned: CRM 250 AR
- Location: East Midlands
Re: My CRM's
Three great CRM's... I do like the later one best I think! Sorry to hear about the wife, but hey..... bikes don't moan when you want to ride another one! And your mates don't usually mind if you want to ride theirs!! ;)
-
- Super Moderator
- Reactions:
- Posts: 1027
- Joined: 12 Sep 2010, 10:48
- Bike Owned: KTM 200 exc
- Location: Derbyshire/Notts border
- madmanreevo
- Site Supporter
- Reactions:
- Posts: 122
- Joined: 03 Oct 2004, 19:46
- Bike Owned: crm 2.2
- Location: warrington Cheshire UK
Re: My CRM's
Im not sorry about my exwife ... glad to get rid !! Just hard with the 5 kids we have......Taken my 15 yr old and gf to IOM in my van with the SM'ed CRM (waiting for wheels should be here next weekend talon, excel jobbies xr650 £250 !!) and her zx6r..........
3rd CRM250 MK2, rebuilt incl Braided hoses,powdercoated,one off bronze swingarm bushes,taper head bearings,hard chromed fork, poweredcoated rear spring and rebuilt. custom graphics, also own TL1000s, Aprillia RS250 (300 kit stage 3 tuned), Yamaha RD400c