Noobie time

If a new member, introduce yourselves here, maybe even a pic of your bike.
Post Reply
User avatar
Mattimus
New kid on the block
New kid on the block
Posts: 2
Joined: 31 May 2011, 11:45
Noobie time

Post by Mattimus »

Hey guys, new member to the forum just popping in to say hey and ask a couple of questions about my new-to-me 98 model CRM 250 AR.

First of all, with this being the first 2 stroke I've ever owned, what ratio of 2 stroke oil do I need to mix with unleaded? Also, what oil is the best to go for?
Secondly, the guy I bought it off reckons he's recently done the fork seals, however the front feels a little mushy, goes down a bit when I pick the bike up off the stand and doesn't spring back up like it should. Is there any way to adjust this? I'd like it to sit a little stiffer.

Cheers, hopefully this bike brings me as much joy as it has a lot of other members of this forum :)
fallenmikethebike
NWAA Supporter
NWAA Supporter
Posts: 3520
Joined: 02 Dec 2007, 16:02
Bike Owned: MK3
Location: Mid Surrey
Re: Noobie time

Post by fallenmikethebike »

:D Hi welcome, what area are located, roughly.
CRM,s unless buggered with should be autolube, which on the AR is a clear tank under the petrol tank.
The best 2t oil ?, that's likely to garner as many different oils as the number of people who comment, but, a good quality, SEMI, 2T will usually give trouble free use.
The front end on all CRM,s is just the acceptable side of woeful, but there are compression dampers, so have a twiddle prior to assuming the worst.
It's also worth having a look at the VERY, extensive search area, you will struggle to find a problem that someone has not already cured at some time.
There now, wasn't I the the very model of restrained, informative, welcome wagon driver. :lol: :lol:
I must of had a very good weekend.
Mike
VFORCE REEDS-MUGEN HEAD AND BARREL-WHITE POWER-ALL ON MY WISH LIST!!
User avatar
Mattimus
New kid on the block
New kid on the block
Posts: 2
Joined: 31 May 2011, 11:45
Re: Noobie time

Post by Mattimus »

I am located in a small-ish town in South Australia! Great tracks out bush around where I live, will keep me entertained.

I'm not sure what the deal with this autolube thing is, have never heard of it before, but the guy I bought it from (who didn't seem overly bright) said he used to just use premix on the bike. I'll go have a look for this 'autolube' tank when I go outside next.

Oh and where abouts will I find these compression dampers? cause I definitely wanna have a go at making it ride just that little bit more firm.

Yes perhaps I will have a little peek at this search feature, just to not warrant frustrated answers to obvious questions in the future ;)

Thanks for the info mate :)
User avatar
knackeredMk1
Super Moderator
Super Moderator
Posts: 4185
Joined: 03 Nov 2006, 17:41
Bike Owned: Modified Mk1
Re: Noobie time

Post by knackeredMk1 »


Post Reply