straight rear fender Mk3/AR
Re: straight rear fender Mk3/AR
I know that I paid a bit over the odds for it but I really like the look of the Japanese supermotos and the new rear mudguard that sticks straight out seems to give it a bit of a different look that I like.
We will see when it turns up as I have no idea what I am going to mount the rear light/ number plate and indicators to when it's fitted.
This is what I am after but mine will have the supermoto Wheels
We will see when it turns up as I have no idea what I am going to mount the rear light/ number plate and indicators to when it's fitted.
This is what I am after but mine will have the supermoto Wheels
- BaNZ
- New kid on the block
- Reactions:
- Posts: 41
- Joined: 23 Jun 2011, 13:23
- Bike Owned: CRM250-MK2 '93
- Location: Vladivostok, Russia
- Contact:
Re: straight rear fender Mk3/AR
Ok, ok, Simon! Straight rear fender must have for any fancy/stylish looking bike. ;)
Yup, it's "a bit" pricey, but really priceless for CRM owner.
Gonna order one for myself today.
P.S. Note for all buyers: only fender included, no lamps or signals. I specially checked this with retailer.
Yup, it's "a bit" pricey, but really priceless for CRM owner.
Gonna order one for myself today.
P.S. Note for all buyers: only fender included, no lamps or signals. I specially checked this with retailer.
Re: straight rear fender Mk3/AR
Banz,
Which type of brake light/numberplate/indicator unit are you planning on using? I have come across a couple but they have nowhere to mount indicators
all the best
Simon
Which type of brake light/numberplate/indicator unit are you planning on using? I have come across a couple but they have nowhere to mount indicators
all the best
Simon
- BaNZ
- New kid on the block
- Reactions:
- Posts: 41
- Joined: 23 Jun 2011, 13:23
- Bike Owned: CRM250-MK2 '93
- Location: Vladivostok, Russia
- Contact:
Re: straight rear fender Mk3/AR
Actual question. Well, I suppose to use something like this (http://www.ebay.com/itm/230835638032?ss ... 1438.l2649).
Signals, light, brake all in one, the only problem might be with visibility. In this case you can buy only tail/brake light and use some generic turn signals. But you'll need to buy (or even make) harness for all this garland.
Or you can even buy stripe of red leds and stick it on fender. Don't know how is it legit.
As for number plate, personally I'm not interesting in mounting such device, but you can get something like this (http://www.ebay.com/itm/CLEAR-LED-Turn- ... 47&vxp=mtr) or search for something similar. I bet it's not that difficult to make such plate by yourself.
More important question (for me) how not to drill any more holes in fender for lights mounting. I suggest use original frame mounts instead.
Signals, light, brake all in one, the only problem might be with visibility. In this case you can buy only tail/brake light and use some generic turn signals. But you'll need to buy (or even make) harness for all this garland.
Or you can even buy stripe of red leds and stick it on fender. Don't know how is it legit.
As for number plate, personally I'm not interesting in mounting such device, but you can get something like this (http://www.ebay.com/itm/CLEAR-LED-Turn- ... 47&vxp=mtr) or search for something similar. I bet it's not that difficult to make such plate by yourself.
More important question (for me) how not to drill any more holes in fender for lights mounting. I suggest use original frame mounts instead.
- BaNZ
- New kid on the block
- Reactions:
- Posts: 41
- Joined: 23 Jun 2011, 13:23
- Bike Owned: CRM250-MK2 '93
- Location: Vladivostok, Russia
- Contact:
Re: straight rear fender Mk3/AR
Just ordered one fender. And zeta brake line clamp. ^_^V
Re: straight rear fender Mk3/AR
Banz,
Just got my import bill from our wonderful government, had to pay £26.00 tax and also £13.50 clearance fee which has put the price up somewhat however the fender should be with me tomorrow.
I eventually got hold of a numberplate hanger and rear light unit from Australia which came today.
I have got some indicators from a KTM that are left over from an old project that look like they will do the job so assuming it is going to be raining a lot over the weekend i will have a go at fitting it and see where i go from there.
I will flick up some pictures when i am done.
All tbe best
Simon
Just got my import bill from our wonderful government, had to pay £26.00 tax and also £13.50 clearance fee which has put the price up somewhat however the fender should be with me tomorrow.
I eventually got hold of a numberplate hanger and rear light unit from Australia which came today.
I have got some indicators from a KTM that are left over from an old project that look like they will do the job so assuming it is going to be raining a lot over the weekend i will have a go at fitting it and see where i go from there.
I will flick up some pictures when i am done.
All tbe best
Simon
Re: straight rear fender Mk3/AR
wow expensive import fees!
In AUS the import fees are 0$ unless the item is above $1000 declared value!
hope it looks good (so that its worth it haha)
In AUS the import fees are 0$ unless the item is above $1000 declared value!
hope it looks good (so that its worth it haha)
Re: straight rear fender Mk3/AR
It's arrived and it's white, not black as I ordered...............
Looks like I will have to spray the tank white and change the colour scheme of the bike as its not really an option to send the beggar back.
The joys of fixing a bike up.
Looks like I will have to spray the tank white and change the colour scheme of the bike as its not really an option to send the beggar back.
The joys of fixing a bike up.
- BaNZ
- New kid on the block
- Reactions:
- Posts: 41
- Joined: 23 Jun 2011, 13:23
- Bike Owned: CRM250-MK2 '93
- Location: Vladivostok, Russia
- Contact:
Re: straight rear fender Mk3/AR
Are you sure you ordered black one? What was item number? There is two letters on the end. "WH" for white and "BK" for black. (CJE12WH, CJE12BK)
Courier just brought package at home, while I'm at work. I wonder if they missed color of mine. But I really doubt, they are japanese, after all.
No any taxes for me, but webike will get themselves case, if they missed color.
I advice you to do same, Simon.
Courier just brought package at home, while I'm at work. I wonder if they missed color of mine. But I really doubt, they are japanese, after all.
No any taxes for me, but webike will get themselves case, if they missed color.
I advice you to do same, Simon.
- BaNZ
- New kid on the block
- Reactions:
- Posts: 41
- Joined: 23 Jun 2011, 13:23
- Bike Owned: CRM250-MK2 '93
- Location: Vladivostok, Russia
- Contact:
Re: straight rear fender Mk3/AR
Back home and found black rear fender. Everything is cool.
http://hostinga.imagecross.com/image-ho ... 4maier.jpg
http://hostinga.imagecross.com/image-ho ... 4maier.jpg