Tidying up....
Tidying up....
I will be racing my 400 this year so my CRM has to go. I have afew questions....
My frame will be sent off for powder coating once i have stripped it down. I know the swingarm bearings can be a knightmare so they will be soaked in oil. The question is how hard is it going to be to assemble the bike? I.E setting up the power valves and oil pump ect.
I have striped and rebuilt my old aprilia mx125 so im no stranger to a set of spanners, However once its all apart i will be cleaning/refurbishing other parts.
Does anyone have any good tips to stripping the bike down?
Also does anyone have a paint code for a white MK2? My tank could do with a fresh coat of paint.
My frame will be sent off for powder coating once i have stripped it down. I know the swingarm bearings can be a knightmare so they will be soaked in oil. The question is how hard is it going to be to assemble the bike? I.E setting up the power valves and oil pump ect.
I have striped and rebuilt my old aprilia mx125 so im no stranger to a set of spanners, However once its all apart i will be cleaning/refurbishing other parts.
Does anyone have any good tips to stripping the bike down?
Also does anyone have a paint code for a white MK2? My tank could do with a fresh coat of paint.
- Mudfacetony
- Site Supporter
- Reactions:
- Posts: 522
- Joined: 07 Jun 2007, 06:20
- Bike Owned: Mk2.2, Mk3
- Location: Durham
Re: Tidying up....
Take loads of photos and look in the frequently asked questions or do a search its all in here somewhereMorris147 wrote:I will be racing my 400 this year so my CRM has to go. I have afew questions....
My frame will be sent off for powder coating once i have stripped it down. I know the swingarm bearings can be a knightmare so they will be soaked in oil. The question is how hard is it going to be to assemble the bike? I.E setting up the power valves and oil pump ect.
I have striped and rebuilt my old aprilia mx125 so im no stranger to a set of spanners, However once its all apart i will be cleaning/refurbishing other parts.
Does anyone have any good tips to stripping the bike down?
Also does anyone have a paint code for a white MK2? My tank could do with a fresh coat of paint.
- knackeredMk1
- Super Moderator
- Reactions:
- Posts: 4184
- Joined: 03 Nov 2006, 17:41
- Bike Owned: Modified Mk1
Re: Tidying up....
+1 and why not powdercoat the tank white when doing the frame as it is very difficult to match shades of white.
- pudzie83
- Site Supporter
- Reactions:
- Posts: 384
- Joined: 29 May 2012, 13:19
- Bike Owned: mk2 1992
- Location: england
Re: Tidying up....
in relation to stripping down have a copper ended lump hammer to hand
Re: Tidying up....
Im planing on getting my frame powder coated black, as its looks like jet washing the bike off over the years has taken its toll.