Hello everyone !!!

I have CRm250 MK2 cdi have damage ,pre-owner fix many time and now can not do anything, i have replace whole wiring system from MK1 ,including wiring loom,2 CDIs,condenser ,when i kick it there have spark one time ,anyone have try it before ? is the flywheel in MK1 same with MK2 ? i wondering the trigger on flywheel of Mk1 and MK2 not same then spark not correct.Thanks for your help

there is good information about the cdi and flywheels in the Frequently Asked Questions
viewtopic.php?f=20&t=5263#p59999
though it does not seem to mention Mk1 cdi/flywheel compatibility

The Mk1 and Mk2 flywheels are different and the trigger points on the crank cases are different.

Thanks ,i have double check flywheel MK2 with MK1 they are not same trigger ,i will revise trigger on MK2 same Mk1 then try it out .