Evening CRM fans,

This might be a stupid question but Im gonna ask it anyway. Ive snapped the brass fitting on the 2 stroke oil pump and doesnt sound like they can be bought from Honda.

I dont mind going premix but other than just getting the mix in the tank correct is there anything else i needd to do?
the
Do I need to block off the entry to the carb boot?

Cheers

I would block off the boot for sure. you wil maybe have to jet a little richer as the oil in the fuel makes the mixture leaner (less fuel to air).
I read the NSR has a similar pump so you may be able to strip one of those?

Yay a reply! Good idea on the Nsr. And thanks for the tip on the jetting.