can anybody tell me the settings for torqueing the fork pinch bolts in the yokes?
John

didnt know there was any but if the forks slide through and knock your teeth down your throat there not quite tight enough

two grunts and a slight groan

I've read that you have to be careful with upside down forks because if you overtighten them you can distort the tubes?
John

to be honest mine get wound up till there tight and no problems (yet) there maybe settings for them try leisure trail they should tell you

you can, but i think you,d have to really dog em up to do that. just dont use a daft long power bar or any thing just good n tight with a half inch drive ratchet should be good enough but try to do em all evenly

[b]mickstoy :[/b]
> didnt know there was any but if the forks slide through and knock your teeth
> down your throat there not quite tight enough

Now that's helpfull

you can find the torque settings in the leisure trail manual which is on this site

top 2.4kg-m
bottom 2.7kg-m
no idea how to convert that into lbs/ft or n/m
probably best to buy a jap torque wrench aswell

thanks for that.
John