What is the best/easiest way to strip graphics off the bike.
Thanks

ed use a hair dryer to warm the old graphics and they should come off a lot easier,you can also use a hot air gun but you have to be carefull

Cheers,
I'll give it a go

Use contact cleaner on the glue that sometimes gets left. Some brands are better than others but there are so many ..............

I use white spirit to clean off the glue left behind

Thanks it worked a treat
Before which is a little to loud for me 8)


and after



Now I just need to get some mud on it to match the rest of the bike

still an avid jet wash fan then ed!

slider wrote:still an avid jet wash fan then ed!

It's all the warnings I have read about how bad jet washing is for the bearings

when stripping graphics off the petrol tank do i need to drain the tank first

you shouldn't need to if your using the hair dryer technique,i'd give the paint stripping gun a miss on a tank with fuel in it paddy

slider wrote:still an avid jet wash fan then ed!

quick as ever slider

well you know how it is j

If you use a jet wash the graphics will come off anyway