Engine oil level?

Post Reply
User avatar
Olie
New kid on the block
New kid on the block
Posts: 13
Joined: 19 Apr 2010, 20:46
Engine oil level?

Post by Olie »

hi, how do you chaps check your engine oil on mk 2's?, there is no dipstick or level window , do you just have to empty the oil and put a certain amount back in?
Thanks , Olie
twistednuts
Site Supporter
Site Supporter
Posts: 937
Joined: 07 Feb 2010, 00:37
Location: Lancashire
Re: Engine oil level?

Post by twistednuts »

If you look down then to the right of the oil fill cap on the engine, you`ll see a 10mm nut with a phillips head.

With the bike straight up, remove this nut, fill with oil till the oil starts to flow out of the hole, then replace nut.
User avatar
SkidMark
Site Supporter
Site Supporter
Posts: 810
Joined: 19 Jan 2007, 18:38
Location: Uganda
Contact:
Re: Engine oil level?

Post by SkidMark »

just to add that you should leave the bike upright and let it finish draining from the oil fill hole before reinstalling the oil level plug.

Regards
SkidMark
AR's rock!!!
TwinAir filter, Braided Brake Hoses, Swingarm/Shock bearings done!, Rear Shock overhauled and customised by G-Force, 14-44 Gearing, Exhaust decoked (fun with Caustic Soda!), DEP silencer.
User avatar
Olie
New kid on the block
New kid on the block
Posts: 13
Joined: 19 Apr 2010, 20:46
Re: Engine oil level?

Post by Olie »

Thanks alot guys this one had me scratching my head for quite a while...

Post Reply