mk3 parts on mk2

Post Reply
User avatar
polis
New kid on the block
New kid on the block
Reactions:
Posts: 2
Joined: 05 Aug 2006, 09:27
mk3 parts on mk2

Post by polis » 19 Feb 2012, 11:16

hi everyone.
does anyone know if mk3's fenders, tank, sidepanels fit to mk2 model?
thinking of changing them as mk2 starts to look really old
thanks
Top
User avatar
knackeredMk1
Super Moderator
Super Moderator
Reactions:
Posts: 4185
Joined: 03 Nov 2006, 17:41
Bike Owned: Modified Mk1
Re: mk3 parts on mk2

Post by knackeredMk1 » 19 Feb 2012, 15:14

Basically no. Not without alot of work and a new subframe at least.
Top
back off road
Super Moderator
Super Moderator
Reactions:
Posts: 1027
Joined: 12 Sep 2010, 10:48
Bike Owned: KTM 200 exc
Location: Derbyshire/Notts border
Re: mk3 parts on mk2

Post by back off road » 19 Feb 2012, 18:26

if thats the case wouldnt the cr option be a better route due to the readily available and cheaper parts ?
Im thinking about a bike with more valves than a powervalve
Top
User avatar
knackeredMk1
Super Moderator
Super Moderator
Reactions:
Posts: 4185
Joined: 03 Nov 2006, 17:41
Bike Owned: Modified Mk1
Re: mk3 parts on mk2

Post by knackeredMk1 » 19 Feb 2012, 18:30

AS BOR says 'CR option' would be better. - viewtopic.php?f=14&t=6110 This is CR onto a Mk3 but the same principles apply.
Top
Post Reply

Return to “Technical”