Throttle cable part No Mk3

Post by **Mudfacetony** » 04 Jun 2012, 19:39

I need a new throttle cable and the last time I tried LT they were sold out and did not know when they would get any more.

The part No for the Mk2 is 17910-KAE-870
The AR is 17910-KAE-770

I dont have a parts list for my Mk3 but looking at these part No's these are the same so the MK3 will be one or the other?

Post by **knackeredMk1** » 04 Jun 2012, 20:51

Mk3 - 17910-KAE-740

Lings don't have them either so there maybe no more stock as LT said.

Post by **back off road** » 04 Jun 2012, 20:59

if youve got a useable set of outer cables surly you can get a new set of inners made up

Post by **knackeredMk1** » 04 Jun 2012, 21:16

You can get pretty much everything made up as new but it's just adds some difficulty. MTX cables are available so you could get the junction bit from there and then the outers and inners are readily available. I suspect the MTX200 cable with a bit of alteration may be suitable.

Post by **Mudfacetony** » 06 Jun 2012, 20:51

I have been able to get a throttle cable from David Silver spares but they only had one left (I tried 2) - that is to say only one of their suppliers had one listed as in stock so hopefully I have one in the bag.

I telephoned LT as well to get another bit and spoke with Gerry who works on the spares counter. i asked him if they had any Mk2 throttle cables. They don't have any and he said in fact the cable they provide for Mk1, 2 and 3 are the same cable.

Gerry also said he would chase their cable supplier.

Post by **fishtail** » 25 Sep 2012, 15:41

so it looks like mk1 2 3 are compatible if thats LT's line?

how about AR? seen some cables for a fiver local fleabay site...

do i go for these ( jus says CRM )

http://item.taobao.com/item.htm?id=9891 ... 1341359315

or these? says AR ( and seems to be clutch and throttle for about 6 quid? )

http://item.taobao.com/item.htm?id=1290 ... 1751557438

Post by **helisupp** » 25 Sep 2012, 16:23

I have been told LT now have them in stock....................just had them made.

njhardy · Post by **njhardy** » 07 Oct 2012, 04:58

Tried to buy the 55.00Y CRM 250 throttle cable, but the website is awful (even when translated) and it doesn't seem to accept my credit card, or delivery to Vietnam.. Any advise fishy??

Post by **fishtail** » 07 Oct 2012, 05:55

mine gets delivered tomorrow.. let me check out if its any good..

actually they have a bunch - let me see if I can get one sent to you? basically I'm getting a chinese mate to deal with it!

send me a PM with address...

njhardy · Post by **njhardy** » 08 Oct 2012, 06:56

Great fishy- if its good and fits the Mk3 then could you get me one??

I desperately need one, as my throttle keeps sticking 'full-on'!! Not good.

I did think it was odd that they don't deliver to Nam, even though we but-on to China and have mostly Chinese living here...

I can either paypal you the money and the p & p fee, or send it to a bank account number- whichever...

Post by **Arj256** » 11 Nov 2013, 20:24

Just to state whats been said in the thread earlier.
The Mk3 throttle cable is compatible with a Mk2?
So the part number 17910-KAE-770 would do the trick

Throttle cable part No Mk3

Throttle cable part No Mk3

Re: Throttle cable part No Mk3

Re: Throttle cable part No Mk3

Re: Throttle cable part No Mk3

Re: Throttle cable part No Mk3

Re: Throttle cable part No Mk3

Re: Throttle cable part No Mk3

Re: Throttle cable part No Mk3

Re: Throttle cable part No Mk3

Re: Throttle cable part No Mk3

Re: Throttle cable part No Mk3