hi mi name is Dennis Rempel from Paraguay.
Im 26 years old and ive being working on CRM's since im 18.
i had one AR and a Mk1. Right now im looking for a Mk1
To start a new projekt. Its hard to get spearparts here and
Info is lacking here, too. So this site has being my only help so far.
Thanks for the suport!

hello and welcome......masses of info here,just have a good look in faq and you'll find most of the basics there.

anything else....lots of helpful folks here too....

Thanks! Doing a rebuild on a friends AR right now. Has a
Fmf exp chamber maybe from a CR. Rod, crank and piston
Where all messd up. Love the motard/specials/rebuild section.

Don't know what happened but got double post so copied from FMtB:

Welcome, I believe your our first South American correspondent. You will undoubtedly find that someone at sometime will have had most every problem with their bike, so it's worth while looking in the search area prior to posting up a question.
Regards
Mike

To which Carbguy replied:

Dont worry Mike, already saw that im not the only one having an
Annoying powervalve issue.
Its like an oasis in the desert since i found this site.
Thumbs up! 2 stroke 4ever!

My post:

Welcome. We have had two SA members as I remember - One from Columbia and one from Argentina.

^^^^Thanks Steve, for the correction as well.
Mike

Hi Dennis,

If you do a search there is some info on manuals and parts lists for different models (mainly the Mk2) that are strored on places lake photobucket.com, if you get stuck, some kind person will point you in the right direction

I would love to get my hands on info about the
Yz490 conrod mod. Its almost imposible get an decent
Replacement for the stock crm rod.

Welcome Dennis