Xenon Lights

Post Reply
User avatar
oneandonly04
New kid on the block
New kid on the block
Posts: 45
Joined: 23 Apr 2007, 05:51
Location: !!!!Northern NSW,Australia!!!!
Xenon Lights

Post by oneandonly04 »

Hi all,
has anyone experimented with Xenon lights on these bikes? From what I've read you need an igniter for this type of lighting that uses a large amount of current to form an arc through the globe, which is where I'm stuck wondering whether or not the CRM coil would produce enough power to ignite a set without killing all power to the bike - or nuking the CDI and such.
any information to whether or not this would be possible would be appreciated, and if not could someone recomend a brighter replacement bulb for the stock one? Mine just blew and i thought i might as well upgrade (1999 AR model).
Thanks,
Julian
User avatar
Jonorow
Site Supporter
Site Supporter
Posts: 388
Joined: 22 Dec 2005, 13:58
Location: London

Post by Jonorow »

Hi, yes the xenon bulbs use a lot of current but that is produced by the pack that powers it. The crm shoul produce enough power and dont worry about burning out the cdi, as long as your Reg/Rec is ok there is no chance of damage no matter how many or how few lights you have on. Jon
98 (94) CRM250 MK3
96 ST1100PT
99 NT650V Deauville (Gone to roads new)
http://www.rymcc.co.uk
User avatar
Davey Munroe
Visitor
Visitor
Posts: 94
Joined: 02 Jan 2007, 11:12
Location: West Sussex

Post by Davey Munroe »

yeah, go on, melt your headlight lens :D :D :D :D
***95Mk3 CRM***
***XT600 Tenere***
***XL600v Transalp***
***Aprilia 280 Climber***
User avatar
oneandonly04
New kid on the block
New kid on the block
Posts: 45
Joined: 23 Apr 2007, 05:51
Location: !!!!Northern NSW,Australia!!!!

Post by oneandonly04 »

would anyone happen to have what model bulbs i'd need handy ie h2,3,4 etc.?
what do you mean about the headlight melting? from what i see they're just brighter, not hotter.
User avatar
slider
Forum Bore !
Forum Bore !
Posts: 620
Joined: 29 May 2006, 02:23
Location: stoke on trent

Post by slider »

i think thats dave trying to crack a joke mate,easy to miss though :lol: :lol:
User avatar
Davey Munroe
Visitor
Visitor
Posts: 94
Joined: 02 Jan 2007, 11:12
Location: West Sussex

Post by Davey Munroe »

When I bought my bike, the lens on the headlight was melted in the middle, making it opaque(good word). The man in LT told me it was due to puting in a more powerful than standard bulb in. So bought new headlight with standard bulb, and voila(french) nice \"bright\" light.

In all seriousness though, check out the bulb rating maybe, as more power normally means more heat with light bulbs.

Regards :D :D :D :D
***95Mk3 CRM***
***XT600 Tenere***
***XL600v Transalp***
***Aprilia 280 Climber***
User avatar
purple rooster
Regular Visitor
Regular Visitor
Posts: 128
Joined: 05 Jan 2007, 19:06
Bike Owned: Mk3 prospec
Location: cheadle staffs

Post by purple rooster »

never ride with a bumbag over the headlamp iether this will cause meltdown too..............im dim me
ayup duck! livin on the edge................of a big rut!
User avatar
slider
Forum Bore !
Forum Bore !
Posts: 620
Joined: 29 May 2006, 02:23
Location: stoke on trent

Post by slider »

i bet your headlight was aswell eh?

Post Reply