Water in rear subframe....

Post Reply
User avatar
isimmins
New kid on the block
New kid on the block
Reactions:
Posts: 32
Joined: 20 Sep 2007, 10:16
Location: East Devon, Nr. Exeter. CRM Mk2 96 (92), CR250 87, TDM850 96
Water in rear subframe....

Post by isimmins » 26 Mar 2008, 22:45

I took the pillion footrests off the CRM tonight. As I removed the securing bolts on the gear change side footrest quite a bit of water came out of the holes. Anybody else experienced this? Would it be worth drilling a small hole at the bottom of that section to drain any water which is still in the tube?

Ian
Top
User avatar
knackeredMk1
Super Moderator
Super Moderator
Reactions:
Posts: 4185
Joined: 03 Nov 2006, 17:41
Bike Owned: Modified Mk1
Re: Water in rear subframe....

Post by knackeredMk1 » 26 Mar 2008, 22:49

Yes - I think mine has some.
Top
User avatar
isimmins
New kid on the block
New kid on the block
Reactions:
Posts: 32
Joined: 20 Sep 2007, 10:16
Location: East Devon, Nr. Exeter. CRM Mk2 96 (92), CR250 87, TDM850 96
Re: Water in rear subframe....

Post by isimmins » 27 Mar 2008, 09:48

knackeredMk1 wrote:Yes - I think mine has some.
OK, thanks. I drilled them this morning and more rusty water came out. Just the gear change side though.
Top
Post Reply

Return to “Technical”