Madmanreevo's CRM Motard PIC's !!
-
madmanreevo
- Site Supporter
- Posts: 122
- Joined: 03 Oct 2004, 19:46
- Bike Owned: crm 2.2
- Location: warrington Cheshire UK
Madmanreevo's CRM Motard PIC's !!
Here is my CRM SM, with 2nd hand XR650 wheels (talon hubs, excel rims) some mods needed to fit.
- Attachments
-
3rd CRM250 MK2, rebuilt incl Braided hoses,powdercoated,one off bronze swingarm bushes,taper head bearings,hard chromed fork, poweredcoated rear spring and rebuilt. custom graphics, also own TL1000s, Aprillia RS250 (300 kit stage 3 tuned), Yamaha RD400c
-
madmanreevo
- Site Supporter
- Posts: 122
- Joined: 03 Oct 2004, 19:46
- Bike Owned: crm 2.2
- Location: warrington Cheshire UK
Re: Madmanreevo's CRM Motard PIC's !!
View from the other side 
- Attachments
-
3rd CRM250 MK2, rebuilt incl Braided hoses,powdercoated,one off bronze swingarm bushes,taper head bearings,hard chromed fork, poweredcoated rear spring and rebuilt. custom graphics, also own TL1000s, Aprillia RS250 (300 kit stage 3 tuned), Yamaha RD400c
-
twistednuts
- Site Supporter
- Posts: 937
- Joined: 07 Feb 2010, 00:37
- Location: Lancashire
Re: Madmanreevo's CRM Motard PIC's !!
Looks smashin that fella. Only thing id change is the front mudguard. Shorter sm ones make the front end look sooo much neater.
Them wheels look very smart
Them wheels look very smart
-
madmanreevo
- Site Supporter
- Posts: 122
- Joined: 03 Oct 2004, 19:46
- Bike Owned: crm 2.2
- Location: warrington Cheshire UK
Re: Madmanreevo's CRM Motard PIC's !!
Rear end, went for gold O ring 520 chain, 42 rear sprocket runnig a 14 at front waiting for a 15 tooth.
- Attachments
-
3rd CRM250 MK2, rebuilt incl Braided hoses,powdercoated,one off bronze swingarm bushes,taper head bearings,hard chromed fork, poweredcoated rear spring and rebuilt. custom graphics, also own TL1000s, Aprillia RS250 (300 kit stage 3 tuned), Yamaha RD400c
-
madmanreevo
- Site Supporter
- Posts: 122
- Joined: 03 Oct 2004, 19:46
- Bike Owned: crm 2.2
- Location: warrington Cheshire UK
Re: Madmanreevo's CRM Motard PIC's !!
Nicer rear than some women I know 
sticky Pirelli Diablo boots.
sticky Pirelli Diablo boots.- Attachments
-
3rd CRM250 MK2, rebuilt incl Braided hoses,powdercoated,one off bronze swingarm bushes,taper head bearings,hard chromed fork, poweredcoated rear spring and rebuilt. custom graphics, also own TL1000s, Aprillia RS250 (300 kit stage 3 tuned), Yamaha RD400c
-
madmanreevo
- Site Supporter
- Posts: 122
- Joined: 03 Oct 2004, 19:46
- Bike Owned: crm 2.2
- Location: warrington Cheshire UK
Re: Madmanreevo's CRM Motard PIC's !!
Yesterday fitted 320 front disc (not shown on pic's above as taken day before). 
- Attachments
-
3rd CRM250 MK2, rebuilt incl Braided hoses,powdercoated,one off bronze swingarm bushes,taper head bearings,hard chromed fork, poweredcoated rear spring and rebuilt. custom graphics, also own TL1000s, Aprillia RS250 (300 kit stage 3 tuned), Yamaha RD400c
-
twistednuts
- Site Supporter
- Posts: 937
- Joined: 07 Feb 2010, 00:37
- Location: Lancashire
Re: Madmanreevo's CRM Motard PIC's !!
Your bike makes me wish id done a better job of mine 
I brush painted the frame like a cheapskate!! Ha, thought it would only be used off road so didnt bother much. But now its moto'd i could do to re-do it
Whats left to do on yours
I brush painted the frame like a cheapskate!! Ha, thought it would only be used off road so didnt bother much. But now its moto'd i could do to re-do it
Whats left to do on yours
-
madmanreevo
- Site Supporter
- Posts: 122
- Joined: 03 Oct 2004, 19:46
- Bike Owned: crm 2.2
- Location: warrington Cheshire UK
Re: Madmanreevo's CRM Motard PIC's !!
Cheers Twisted,......shorter front mudguard DOH knew i forgot something 
Was on my list to do ....been sooo busy, going IOM end of month in vito van with zx6r crm , girlfriend and my son.
Checking my van over noticed it needed driveshaft boots then bloody front strut spring went !! that was about 2/3 weeks ago and I still had to do a few jobs on zx6 and do the SM conversion...well Im skint now so I can live with the longer front mudguard for now
Left to do: basically all i need to do is strip topend at some point in the future clean and polish the ports check bore, maybe mod the airbox similar to knackered's put in aftermarket reeds and reed block.
knew i forgot something Was on my list to do ....been sooo busy, going IOM end of month in vito van with zx6r crm , girlfriend and my son.
Checking my van over noticed it needed driveshaft boots then bloody front strut spring went !! that was about 2/3 weeks ago and I still had to do a few jobs on zx6 and do the SM conversion...well Im skint now so I can live with the longer front mudguard for now
Left to do: basically all i need to do is strip topend at some point in the future clean and polish the ports check bore, maybe mod the airbox similar to knackered's put in aftermarket reeds and reed block.
3rd CRM250 MK2, rebuilt incl Braided hoses,powdercoated,one off bronze swingarm bushes,taper head bearings,hard chromed fork, poweredcoated rear spring and rebuilt. custom graphics, also own TL1000s, Aprillia RS250 (300 kit stage 3 tuned), Yamaha RD400c
-
knackeredMk1
- Super Moderator
- Posts: 4185
- Joined: 03 Nov 2006, 17:41
- Bike Owned: Modified Mk1
Re: Madmanreevo's CRM Motard PIC's !!
Very tasty 
.
.-
madmanreevo
- Site Supporter
- Posts: 122
- Joined: 03 Oct 2004, 19:46
- Bike Owned: crm 2.2
- Location: warrington Cheshire UK
Re: Madmanreevo's CRM Motard PIC's !!
cheers knackered 
3rd CRM250 MK2, rebuilt incl Braided hoses,powdercoated,one off bronze swingarm bushes,taper head bearings,hard chromed fork, poweredcoated rear spring and rebuilt. custom graphics, also own TL1000s, Aprillia RS250 (300 kit stage 3 tuned), Yamaha RD400c
Re: Madmanreevo's CRM Motard PIC's !!
madmanreevo. Do you have a problem with scrathing chain on tire, did you do a sprockets spacers, ?
Re: Madmanreevo's CRM Motard PIC's !!
Where you get it a fork guarda fitted to 17" wheel? Oem honda are too wide. And it's a problem with supermoto wheel.
-
madmanreevo
- Site Supporter
- Posts: 122
- Joined: 03 Oct 2004, 19:46
- Bike Owned: crm 2.2
- Location: warrington Cheshire UK
Re: Madmanreevo's CRM Motard PIC's !!
sorry havent been on a while im renovating a house to sell on......forkguards i shaped to fit, no problems with chain.
3rd CRM250 MK2, rebuilt incl Braided hoses,powdercoated,one off bronze swingarm bushes,taper head bearings,hard chromed fork, poweredcoated rear spring and rebuilt. custom graphics, also own TL1000s, Aprillia RS250 (300 kit stage 3 tuned), Yamaha RD400c
Re: Madmanreevo's CRM Motard PIC's !!
I have 4.00 inch and 150/60 metzeler mez03 tire. I hope she will not scratch. I bought OR chain. Please tell me how do you handle with a speedo on 17"?
Re: Madmanreevo's CRM Motard PIC's !!
That looks the nuts, have you any idea what other wheels will fit, I.e. cbr400, a very good friend owns a bike breakers and I would
To see if I can change mine for very little cost.
To see if I can change mine for very little cost.